Skip to content

Commercial security cameras and license plate recognition

Control Services of WNY designs and installs hardwired, professional-grade security camera systems and license plate recognition for commercial properties across New York State. Each system is installed properly, runs on software people can actually use, and comes with training so staff can find video when it matters. At a vehicle gate, a camera reads approved plates, opens the gate, and logs the entry.

Most camera systems fail in one of two ways

The biggest camera mistakes are cheap equipment and overly complicated software. Cheap cameras fail early or record an image too poor to use. Complicated software means nobody on staff can find the footage after something happens, so an expensive system goes unused.

A camera system is worth what you can pull from it on the day you need it.

Professional systems vs consumer cameras

Consumer products like Ring are not a substitute for a commercial or high-security site. The difference comes down to three things.

Hardwired infrastructure

Cameras run on wired power and connections built into the site, not batteries and a household router.

Installed properly

Placement, mounting, and wiring are planned around what needs to be seen and the weather the equipment will face.

Trained properly

Staff learn the system after installation, including how to search recorded video and respond to alerts.

What a modern camera system can do

Smart camera alerts

Get notified when the system sees activity that matters, instead of watching screens all day.

Searchable video

Find the moment you need without scrolling through hours of footage.

License plate recognition

Cameras at a vehicle entry can read approved plates and open the gate.

Facial recognition

Cameras at a door or pedestrian gate can recognize approved people and let them in.

Tied to the entry

Cameras can work with the gate and access control, so video and entry records cover the same events.

License Plate Recognition

A camera reads the plate as the vehicle pulls up, the gate opens when the plate is on the approved list, and the entry is logged, with no card, code, or remote needed.

Without it, every driver has to stop, reach out the window, and swipe a card or punch in a code, in rain, snow, or the dark, while traffic stacks up behind them. Codes get shared and cards get lent out, and the record shows which credential was used, not which vehicle came through. Plate recognition ties access to the vehicle itself.

It suits properties where the same trucks, fleet vehicles, tenants, or residents come and go every day: storage facilities, industrial and warehouse yards, corporate parking, multifamily properties, and gated communities.

Camera position, the angle of the approach, lighting, and how vehicles line up at the gate all affect the read, and snow, ice, road salt, and moisture end up on plates and lenses. The site survey looks at the approach, the gate, the operator, the power, and how traffic actually moves before any equipment is recommended.

Want to see it before you decide? Stop by our Farmington location to see license plate readers in person. Call ahead and we'll have someone ready to walk you through it.

The vehicle pulls up

A camera aimed at the approach captures the plate as the vehicle reaches the gate.

The plate is recognized

The system checks the plate against the approved list for that entry.

The gate opens

An approved plate signals the gate operator to open. The driver never touches a keypad.

The entry is logged

The entry goes into the access record, so you can see which vehicle came through and when.

The owner is notified

The property owner or manager gets a notification that the vehicle entered.

Everyone else still gets in

Visitors and vehicles not on the list use a keypad, card, fob, app, or intercom instead.

Facial recognition

Facial recognition is a feature of the camera system, not a separate product. A camera at a door or pedestrian gate recognizes approved people and lets them in hands-free, so there is no card to lose, fob to lend, or code to pass around.

It works with the same access control that runs keypads, cards, fobs, and mobile credentials. People are added and removed in one place, and every entry lands in the same record. Most sites use it for some entries or some people and keep other credentials for visitors and vendors.

Camera height, lighting, glare, and how people approach the entry all affect recognition, and outdoor cameras at upstate sites also deal with snow, cold, and moisture. Each entry is looked at during the site survey before anything is specified.

Staff-only areas

Doors and gates limited to employees, where shared cards and borrowed fobs are a real concern.

High-security sites

Secure locations that need to know exactly who entered, not just which credential was used.

Hands-full entries

Entries where people arrive carrying tools, equipment, or deliveries and cannot easily dig out a card.

Every system is designed for the site

Camera type, placement, resolution, night performance, storage, the number of cameras, and how long video is kept all depend on what you need to see and why. A storage lot, a loading dock, and an office lobby need different answers.

A site survey settles those questions before a proposal is written, so the system covers what matters without paying for cameras you do not need.

Cameras are part of the perimeter

Control Services of WNY also installs and services the gates, operators, and access control at the entry. When cameras are designed with them, a vehicle can pull up, have its plate recognized, get through the gate, and show up in the entry log and on video, with the owner notified.

Plate recognition only works when the camera, the access control, and the gate operator are designed together. When something stops working, there is one call to make, whether the cause is the camera, the reader software, a ground loop, or the operator.

Security camera questions

Is Ring or another consumer camera enough for a business?

Not for a commercial or high-security site. Consumer cameras are not a substitute for a professional system that is hardwired, installed properly, and comes with training for the people who use it.

How many cameras do I need?

It depends on the size of the property, the entries and areas you need covered, what you need to see in the footage, and how long you want to keep it. A site survey answers that before any proposal.

How much does a commercial camera system cost?

It depends on the site, the number and type of cameras, storage, wiring, labor, and scope. Cutting corners on equipment or installation tends to cost more later. A site survey comes before a proposal.

Is there a monthly cost for a camera system?

That depends on the maintenance contract. The proposal spells out what is included so there are no surprises after installation.

Does license plate recognition replace keypads and cards?

Usually it works alongside them. Approved vehicles enter by plate, while visitors, vendors, and vehicles not on the list use a keypad, card, fob, app, or intercom. The mix is set during design based on how the site is used.

What happens when a vehicle is not on the approved list?

The gate does not open for that plate. The driver uses another access method, such as a code, a card, a mobile credential, or an intercom call to someone who can let them in.

Can plate recognition be added to an existing gate?

It depends on the gate operator and the access control already at the entry. A site survey shows whether the current equipment can tie in or needs an upgrade first.

Can I see the equipment in person?

Yes. Stop by our Farmington location to see entry systems and license plate readers before you decide. Call ahead first.

Is facial recognition better than cards or fobs?

It depends on the site. Facial recognition removes the problem of lost, lent, and shared credentials. Cards, fobs, and keypads are proven and simple to hand to a visitor. A site can use both, and the mix is set during design.

Can facial recognition work with our existing access control?

It depends on the system already in place. A site survey shows whether the cameras can tie into what you have or whether the access control needs an upgrade first.

Can cameras work with our gate and access control?

Yes. Cameras, gates, and access control can be designed as one integrated system, so a camera can recognize an approved plate, open the gate, log the entry, and notify the owner.

Planning a new system, or need service on one you have?

New gates, access control, and cameras start with a site survey. Gate or system down? Call us and you'll hear back within the hour. We're available 24/7.